Max. suction: 8 m
Max. medium temperature+40℃
Max. ambient temperature+40℃
Max. pressure: 6 bar
Transport medium: PH6.5–8.5
Pump body: Cast iron
Pump support:Cast iron
Motor housing: Aluminum
Impeller: Brass/PPO
Motor wire: Copper
Mechanical seal: Ceramic&Graphite
Shaft:45#steel/stainless steel
Two–pole induction motor
Single phase/three phase, 50/60Hz(on demand)
Thermal protector for single phase
Insulation class: B
Protection class: IP44
| Model | Power | Q.Max (L/min) | H.Max (m) | S.Max (m) | Inlet/Outlet (inch) | G.W. (kg) | Packing dimension (mm) | 20GP (pcs) | |
| (Kw) | (HP) | ||||||||
| HFM/5C | 0.55 | 0.75 | 400 | 12.5 | 8 | 2"x2" | 14.8 | 355 × 220 × 270 | 1300 |
| HFM/5B | 0.75 | 1 | 500 | 14 | 8 | 2"x2" | 15.7 | 355 × 220 × 270 | 1200 |
| HFM/5BM | 1.1 | 1.5 | 500 | 20 | 8 | 2"x2" | 19 | 410 × 240 × 300 | 980 |
| HFM/5AM | 1.5 | 2 | 500 | 24 | 8 | 2"x2" | 21 | 410 × 240 × 300 | 980 |
| HFM/6C | 1.1 | 2 | 900 | 12 | 8 | 3"x3" | 29 | 450 × 260 × 350 | 700 |
| HFM/6CR | 1.1 | 2 | 900 | 12 | 8 | 4"x4" | 30 | 450 × 260 × 350 | 700 |
| HFM/6B | 1.5 | 2 | 1000 | 14.7 | 8 | 3"x3" | 30 | 450 × 260 × 350 | 700 |
| HFM/6BR | 1.5 | 2 | 1000 | 14.7 | 8 | 4"x4" | 31 | 450 × 260 × 350 | 700 |
| HFM/6A | 2.2 | 3 | 1100 | 18.5 | 8 | 3"x3" | 38 | 500 × 290 × 360 | 500 |
| HFM/6AR | 2.2 | 3 | 1100 | 18.5 | 8 | 4"x4" | 39 | 500 × 290 × 360 | 500 |
| HFM/7BR | 3 | 4 | 1100 | 20 | 8 | 4"x4" | 42 | 500 × 290 × 360 | 450 |
