Max. suction: 8 m
Max. medium temperature+40℃
Max. ambient temperature+40℃
Max. pressure: 6 bar
Pump body: Cast iron
Pump support: Cast iron
Motor housing: Aluminum
Impeller: Brass/PPO
Motor wire: Copper
Mechanical seal: Graphite&Ceramic
Shaft:45#steel/stainless steel
Two–pole induction motor
Single phase/three phase, 50/60Hz(on demand)
Thermal protector for single phase
Insulation class: B
Protection class: IP44
| Model | Power | Q.Max (L/min) |
H.Max (m) |
S.Max (m) |
Inlet/Outlet (inch) |
Tank Capacity (L) |
Tank Located |
Suggested Pressure Setting Bar |
G.W. (kg) |
Packing dimension (mm) |
20GP (pcs) |
|
| (Kw) | (HP) | |||||||||||
| AUJET60S | 0.37 | 0.5 | 40 | 35 | 9 | 1"x1" | 24L | Horizontal | 1.2–2.4 | 18 | 540 × 380 × 535 | 250 |
| AUJET80S | 0.55 | 0.75 | 50 | 44 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 19 | 540 × 380 × 535 | 250 |
| AUJET100S | 0.75 | 1 | 60 | 48 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 20 | 540 × 380 × 535 | 250 |
| AUJET80L | 0.55 | 0.75 | 50 | 44 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 20 | 540 × 380 × 535 | 250 |
| AUJET100L | 0.75 | 1 | 60 | 48 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 21 | 540 × 380 × 535 | 250 |
| AUJS60S | 0.37 | 0.5 | 40 | 28 | 9 | 1"x1" | 24L | Horizontal | 1.2–2.4 | 13.5 | 540 × 380 × 535 | 250 |
| AUJS80S | 0.55 | 0.75 | 50 | 44 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 16 | 540 × 380 × 535 | 250 |
| AUJS100S | 0.75 | 1 | 60 | 48 | 9 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 17 | 540 × 380 × 535 | 250 |
| AUQB60 | 0.37 | 0.5 | 35 | 35 | 8 | 1"x1" | 24L | Horizontal | 1.2–2.2 | 10 | 530 × 325 × 555 | 300 |
| AUQB70 | 0.55 | 0.75 | 45 | 48 | 8 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 14 | 530 × 325 × 595 | 280 |
| AUQB80 | 0.75 | 1 | 50 | 60 | 8 | 1"x1" | 24L | Horizontal | 1.4–2.8 | 15 | 530 × 325 × 595 | 280 |