.jpg "IDB/PM")
Max. suction:8 m
Max. medium temperature+40℃
Max. ambient temperature+40℃
Max. pressure: 6 bar
Pump body: Cast iron, with brass/AISI304 SS insert if request
Pump support: Cast iron, with brass/AISI304 SS insert if request
Motor housing: Aluminum
Impeller: Brass
Motor wire: copper
Mechanical seal: Graphite&Ceramic
Shaft:45#steel/stainless steel
Two–pole induction motor
Single phase/three phase, 50/60Hz(on demand)
Thermal protector for single phase
Insulation class: B
Protection class: IP 44
| Model | Power | Q.Max (L/min) | H.Max (m) | S.Max (m) | Inlet/Outlet (inch) | G.W. (kg) | Packing dimension | 20GP (pcs) | ||
| (Kw) | (HP) | (mm) | pcs/ctn | |||||||
| IDB-35 | 0.37 | 0.5 | 35 | 35 | 8 | 1"x1" | 5.5 | 430×285×345 | 6 | 4050 |
| IDB-45 | 0.55 | 0.75 | 45 | 48 | 8 | 1"x1" | 9 | 370×340×220 | 2 | 2100 |
| IDB-65 | 0.75 | 1 | 50 | 60 | 8 | 1"x1" | 10 | 370×340×220 | 2 | 2100 |
| PM45 | 0.37 | 0.5 | 35 | 35 | 8 | 1"x1" | 5.5 | 430×285×345 | 6 | 4050 |
| PM80 | 0.75 | 1 | 50 | 60 | 8 | 1"x1" | 10 | 370×340×220 | 2 | 2100 |
